- COMPRESSOR VALVES
- ENGINE PARTS
- COMPRESSOR PARTS
- REPLACEMENT PARTS
- UNLOADING EQUIPMENT
- POLYMER PRODUCTS
- PRECISION REPAIR
- EMISSIONS SOLUTIONS
 |
LOW EMISSION PACKING
LEP™ reduces fugitive gas emissions.
|
LOW EMISSION PACKING
Outperforms Standard Packing.
CECO LEP™, utilizing proprietary Resilon-T® material and innovative packing design, is superior to other pressure packing in the industry. When compared with existing packing, LEP™ dramatically reduces fugitive emissions, lost and unaccounted for gas, and can be easily installed during routine maintenance in the field. CECO LEP™ does not require expensive modifications to the pressure packing case, unlike many emission- reducing alternatives.
RELIABILITY IN THE FIELD
CECO’s proprietary Resilon-T® materials give CECO LEP™ a longer life than standard packing, and minimizes extrusion. CECO can retrofit most existing packing cases. LEP™ can be installed during routine maintenance in the field, eliminating downtime resulting from case rebuilding.
The combined leak rate had been reduced to 2.3 cubic feet per minute, achieving a 93% leak rate reduction with CECO low emission packing.
Value-Adding Technologies American Oil & Gas Reporter
Article by Richard Ayala, Encana
Article by Richard Ayala, Encana
COMPLY WITH NEW EMISSION STANDARDS
Stricter federal, state and corporate mandates demand proven packing that minimizes fugitive gas emissions. Proposed new EPA rules, commonly known as subpart W, require the industry to measure all fugitive gas in the compressor station. Based on Encana analysis of 24 LEP™ converted packing cases, CECO LEP™ will conserve 16.4 million cubic feet of gas yearly and cut 5,800 tons of CO2 equivalent emissions. The quality of LEP™ packing enhances profitability while allowing your company to more easily comply to environmental requirements.
PACKING CASE REPAIR
CECO offers packing case repair and piston rod rebuilding to OEM specifications at our Precision Repair Centers. Cases are carefully inspected, machined, lapped and assembled to assure maximum sealing efficiency.
We also provide new replacement piston rods as worn rods cause unwanted gas leakage.
Reduces greenhouse gas emissions, by decreasing fugitive gas
Reduces lost and unaccounted for gas, for better revenues
Proven design, exceptional results in the gas processing and transmission industries
Easy to install in the field
Helps satisfy EPA and state regulatory compliance
Houston, TX 77081
800-879-2326
713-664-7333
www.tryceco.com
ENGINEERED QUALITY
CECO has been delivering superior products and services to the gas transmission, gas processing and petrochemical industries since 1964. The reliability and efficiency of LEP™ continues our industry leadership in maximizing compressor operations and cost-saving products and service.
Reduces greenhouse gas emissions, by decreasing fugitive gas Reduces lost and unaccounted for gas, for better revenues Proven design, exceptional results in the gas processing and transmission industries Easy to install in the field Helps satisfy EPA and state regulatory compliance
CONTACT US
5440 Alder Dr.Houston, TX 77081
Phone
800-TRY-CECO800-879-2326
713-664-7333
Fax
713-664-6444Email
lepinfo@ceconet.comwww.tryceco.com
® CECO is a registered trademark of Compressor Engineering Corporation.
© 2011 Compressor Engineering Corporation Form 2121 9/11
© 2011 Compressor Engineering Corporation Form 2121 9/11
