HOME  >>  PARTS & REPAIR  >>   POLYMER PRODUCTS  >>  RESILON-T™ PRODUCTS

Resilon-T Products
RESILON-T™ MATERIALS

CECO Resilon-T™ materials are the best solution for the most demanding applications.


C333
Resilon-T® Materials
Carbon Filled PTFE

Successful Lubricated Applications for C333 Material

Gas Temperature (°F) Pressure (psi) Previous Life (hrs) Current Life (hrs)
Air 270 425 8,000 16,000
Natural Gas 140 890 4,500 67,000+
Carbon Dioxide 265 140 4,200 8,000
Ammonia 185 475 2,200 6,700+
Hydrogen Mix 290 650 1,800 12,000+

CECO offers an upgrade to the industry standard carbon filled ptfe at no additional cost. Unlike the competition, Resilon-T® C333 has a higher percentage filler for our standard grade of material. This translates into better physical properties, including improved tensile strength and reduced creep as well as the ductility to be used as a solid rider band.

C333 is a versatile grade that can be run lubricated or non-lubricated. The maximum operating conditions are 300°F at 1200 psi in lubricated applications.

CECO stocks C333 bushings in large quantities in a variety of sizes ranging from 1" to 36" in diameter for immediate manufacturing. Please consult your CECO sales representative for recommendations for your specific operating conditions.

C333 Benefits
  • Improved performance over standard filled ptfe grades
  • Cost effective all-purpose material
  • Lubricated or non-lube service
  • Large inventory in stock for immediate delivery

Call for a Solution:
800-TRY-CECO
800-879-2326
5440 Alder Drive • Houston, Texas 77081 • 713-664-7333 • Fax 713-664-6444
Serving the Compressor Industry Since 1964 • www.tryceco.com


© 2005 Compressor Engineering Corporation
® CECO is a registered trademark of Compressor Engineering Corporation
Form 1548
March 2005 MP2