![]() |
RESILON-T™ MATERIALS
CECO Resilon-T™ materials are the best solution for the most demanding applications.
|
Resilon-T® Materials | ![]() |
Application Bulletin
Reilson-T® Grade | Description | Application and Service information |
---|---|---|
G200 | White glass filled PTFE | Primarily used for air and oxygen service |
G205 | Glass moly filled PTFE | Molybdenum disulfide adds lubricity and stiffness to the material |
G505 | Glass graphite filled PTFE | Lube/non-lube service with improved wear resistance |
G333 | Carbon filled PTFE | Industry standard material for temperatures below 300°F and pressures under 1500 psi |
C508 | Carbon/PEEK filled PTFE | Higher performance in low dew point applications |
B400 | Bronze filled PTFE | For high temperature, high pressure wet air service |
B450 | Bronze moly filled PTFE | For dry air applications and those requiring improved extrusion resistance |
R700 | PPS filled PTFE | Polyphenylene sulfide (Ryton®) exhibits very low deformation at elevated temperature |
A500 | PEEK/PPS/proprietary blend | Outstanding in non-lube, bone-dry applications including hydrogen and methane |
New CECO Resilon-T® Materials | ||
A506 | PPS/Carbon/proprietary | Non-lube hydrocarbon applications including propylene, isobutane, carbon dioxide |
C305 | Carbon/graphite/proprietary | Non-lube cryogenic boil-off gases including compressed natural gas |
PC405 | Carbon filled PEEK/proprietary | Outstanding deformation and wear resistance over 400°F either lube or non-lube |
X540 | Proprietary formulation | Versatile non-lube/lube grade for dry hydrogen, ethylene, methane |
X505 | PPS/proprietary | Wet or dry, non-lube applications with improved performance in higher temperatures and pressures including hydrogen, propane and methane |
© 2004 Compressor Engineering Corporation
® CECO is a registered trademark of Compressor Engineering Corporation
® CECO is a registered trademark of Compressor Engineering Corporation
Form 1377
June 2004 MP5
June 2004 MP5